Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateGarage Door Company in Burbank, CA
Garage door installation in Burbank usually runs $700 – $2,200 for a complete new door, with retrofit work on older mid-century homes accounting for most jobs in the 91505, 91506, 91507, and 91508 ZIP codes. We’re SD Garage Door, and garage doors are all we do. When you call us at (833) 589-6906, you get a technician who works on the brand you already have, not someone trying to sell you a system you don’t need.
Why Burbank Homes Are Different
Burbank is a dense San Fernando Valley city packed with single-family homes built between the 1920s and 1960s. Most garages south of the Verdugo foothills are original wood-frame structures: single-bay or narrow two-bay, short driveways, low headroom, and hardware that’s been in service since the Truman administration. That changes the work. We’re rarely doing clean new-construction installs here. We’re doing torsion spring replacement on post-war doors, track realignment on sagging wood jambs, and retrofit installs where the header clearance was never designed for a modern door.
The climate compounds it. Hot, dry San Fernando Valley summers put wood panels and jambs through big daily temperature swings. UV exposure dries and warps wood. Santa Ana winds blow dust into tracks and onto rollers, wearing them faster than you’d see in coastal LA. Spring fatigue happens on a predictable cycle here, and when a spring lets go on a 1950s single-bay in the flats, the fix usually involves more than just swapping the spring. We check the jamb, the track, the rollers, and the opener’s force settings because that door has been fighting the same conditions for seventy years.
Burbank’s own building and safety permitting also shapes how we work. Permit requirements and inspections are real here, and older garages with non-standard framing sometimes need specific hardware to meet current code. Our techs know what Burbank inspectors look for on retrofit installs, which avoids the second-visit headache that happens when someone guesses wrong on clearance, wind-load, or opener mounting.
Styles & brands we work with
Our Main Burbank Services
Two services account for most of what Burbank homeowners call us about: mechanical door repair and opener repair. Here’s what each looks like in this city.
Garage Door Repair in Burbank
Mechanical repair on a Burbank garage door usually means aging torsion springs, stretched cables, dry-rotted wood jambs, or rollers and track that have collected decades of Valley dust. On a 1940s Spanish bungalow in the flats near the airport, we see original extension spring hardware that nobody has touched in years, and the safest fix is often a conversion to a modern torsion system. On a 1960s tract home near the Verdugo hills, the door itself may be fine while the wood frame around it has warped enough to throw the track out of alignment. This is repair-first work: diagnose the actual failure, fix what’s broken, and leave the rest alone. See Garage Door Repair in Burbank.
Garage Door Opener Repair in Burbank
Opener problems in Burbank run from dead wall consoles and failed logic boards to gear-and-sprocket wear on older LiftMaster and Genie units and stripped drive gears on Chamberlain models. Heat is a factor too: openers mounted in uninsulated Burbank garages run hot all summer, and circuit boards and capacitors fail faster when they bake through July and August. We carry boards, gears, remotes, keypads, and safety sensors for the major brands, so opener repair is usually a same-visit fix. Our techs work on LiftMaster, Chamberlain, Genie, Craftsman, and Raynor openers daily. See Garage Door Opener Repair in Burbank.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Garage Door Installation in Burbank
Garage door installation in Burbank is mostly retrofit work, not new construction. Homes here were built with low-clearance headers, narrow side room, and original wood jambs that have shifted over decades. That means a standard “bolt in a new door” job turns into low-headroom torsion conversion, custom track radius work, and occasional jamb reinforcement. We measure everything before we quote anything. The price you get is the price you pay, and we review the full scope with you before any work begins. SD Garage Door handles Garage Door Installation as a dedicated service: measure, quote, order the right door for the opening, install it correctly, and haul the old one away.
Garage Door Replacement
Signs you need it
Your Burbank door has a cracked or warped wood panel, the bottom section is rotting from decades of ground contact, or the door has sagged enough that it no longer seals against the frame.
What it costs in Burbank
A full garage door replacement in Burbank typically runs $700 – $2,200, with retrofit hardware and low-headroom conversions landing at the upper end of that range.
How we do it
We measure the opening, check header clearance and side room, pull the old door and hardware, install new track and springs sized to the door weight, hang the new panels, and set opener force limits before testing the full cycle.
Garage Door Installation Service
Signs you need it
You’ve bought a new door or you’re planning to, and the opening is an older Burbank garage with non-standard framing that needs a measured, fitted install rather than an off-the-shelf swap.
What it costs in Burbank
Complete new door installation in Burbank ranges $700 – $2,200 depending on door size, material, and whether the job needs a low-headroom track conversion.
How we do it
We confirm the door spec against the actual opening, install new vertical and horizontal track, set springs to the correct tension for the door weight, mount and adjust the opener if one is included, and verify balance and safety reverse settings before we leave.
Garage Door Seal Installation
Signs you need it
Daylight shows under the door or along the jambs, dust and leaves blow into the garage during Santa Ana winds, or you can feel air moving around the closed door.
What it costs in Burbank
Seal installation is part of the repair scope we quote at $150 – $600, with a bottom seal and basic weatherstrip replacement usually on the lower end.
How we do it
We pull the old vinyl or rubber seal, clean the retainer channel, cut a new seal to the full door width, and test the door’s travel and reverse sensitivity so the new seal doesn’t bind or trip the safety reverse.
What Garage Door Installation Costs in Burbank
| Item | Typical range in Burbank |
|---|---|
| Complete new door installation | $700 – $2,200 |
| Panel replacement (single panel) | $250 – $500 |
| Opener installation (new unit) | $250 – $550 |
How long does garage door installation take in Burbank?
Most Burbank installations are done the same day we start, usually 3 – 5 hours for a standard single door. Jobs that need jamb repair or a low-headroom conversion can run longer.
Will you quote the price before installing in Burbank?
Yes. We measure the opening, confirm what the job needs, and give you a written price before any work starts. Nothing gets installed without your approval on the number.
Brands We Service in Burbank
We work on Clopay, Amarr, Wayne Dalton, and Craftsman doors, plus LiftMaster, Chamberlain, Genie, and Raynor openers. Our trucks stock common parts for those brands, which means most Burbank repairs don’t wait on a parts order. See our brands for the full list of what we service.
See the difference
Before
After
Before
After
Before
AfterPricing for Garage Door Company in Burbank, CA
| Service | Typical range in Burbank |
|---|---|
| Spring repair | $180 – $340 |
| Cable repair | $130 – $250 |
| Opener repair | $120 – $320 |
| Opener installation | $250 – $550 |
| Panel replacement | $250 – $500 |
| Track realignment | $120 – $240 |
| Roller replacement | $110 – $220 |
| New door installation | $700 – $2,200 |
| Garage door repair (general) | $150 – $600 |
Prices in Burbank push toward the upper end of these ranges when the door is an original post-war unit with rusted hardware, a low-clearance header, or a wood jamb that has warped enough to need reinforcement. Whatever the job, we quote it up front and get your approval before any work starts. The number we give you is the number you pay.
Neighborhoods We Serve in Burbank
We cover all of Burbank, from the flats south of the 134 through the hillside streets climbing toward the Verdugos. Most calls come from the older single-family tracts where garage door hardware is aging on the same schedule.
- Magnolia Park
- Rancho Adjacent
- The Verdugo foothills
- Northwest Burbank
- The airport-adjacent flats
We can usually reach any Burbank address the same day for repair work.
Service Area – Cities Near Burbank
Beyond Burbank, our service area includes the neighboring San Fernando Valley cities homeowners call us from. We work in Universal City, CA, North Hollywood, CA, Glendale, CA, and Studio City, CA, covering the same older Valley housing stock and the same climate-driven door and opener failures.
Serving Burbank, CA — Our Local Coverage Area
We’re based in the Burbank area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Garage Door Company in Burbank
In most cases, a like-for-like door or opener swap doesn’t require a separate permit, but some Burbank retrofit installs do. We’ll tell you if your job crosses into permit territory before we start, and we install to what Burbank inspectors require.
Same-day response for repair calls is our standard in Burbank, and we’re usually on site within hours. We carry common spring, cable, roller, and opener parts on the truck so most jobs get done in one visit. Call (833) 589-6906 to check availability.
No. We quote the job after we look at the actual door and opening, and that’s the price you pay. If we find something else while we’re working, we stop and give you a separate price before doing anything extra.
What happens when you call
- 1A real person answersNo phone trees — talk to a local garage door pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Burbank Customers Say
"Door installed in about four hours, old one hauled away, and he stayed to program both cars and the wall panel before he left."
— Jasmine Whitfield"Something came loose about a month after the work. Called them, and they were back out the next day and fixed it at no charge. Didn't argue, didn't try to bill me for the trip."
— Diego Salazar"Good repair, reasonable money. The door still has a slight shudder about a foot from the top that he said is the track being slightly out of true on an old frame and would cost real money to fix properly. Fair enough, but I'd hoped it would be perfect."
— Brandon Kim